Meshcast Paper Embosser Maker

What is Meshcast Paper Embosser Maker?

Meshcast Paper Embosser Maker is a browser tool that builds a matched pair of 3D-printable dies for pressing a raised design into paper without ink. You get a male die with the design standing up and a female die with the mirrored cavity, spaced so the two close around a sheet of cardstock.

Start by picking how the plates join. The hinge version prints as one assembled piece, while the magnet version gives two loose plates with pockets for 2 or 4 disc magnets, from 5 x 2 mm up to 10 x 3 mm. Then type up to two lines of text in one of ten font styles, or upload a PNG, JPG or SVG logo and tune its threshold or invert it. Sliders cover design scale, plate width and depth, emboss depth, paper gap, plate thickness and corner radius, and a 3D preview shows both dies as you change them.

The page also explains why the female die looks mirrored and how paper weight, slightly damp paper and stiff infill change the result. It suits crafters making wedding stationery, book plates or return-address seals. Meshcast, based in Berlin, also offers mold, cookie cutter and planter generators. Free downloads are capped and carry a small Meshcast engraving, and selling what you make needs the Pro or Founder plan.

What you can make

• Hinged one-piece paper embossers
• Two-plate embossers with magnet pockets
• Monogram and name embossers
• Logo embossers for business stationery
• Book plate and return-address seals

How to use Meshcast Paper Embosser Maker

1. Open the Paper Embosser Maker and pick the hinge or magnet closure
2. Type up to two lines of text or upload a PNG, JPG or SVG logo
3. Adjust scale, plate size, emboss depth and paper gap
4. Download the STL or 3MF and print flat with the die faces up, no supports
5. Glue in the magnets if you chose them, then press cardstock between the dies