Modelador 3D GeoPanel3D

What is Modelador 3D GeoPanel3D?

GeoPanel3D designs a decorative relief for a whole wall and then cuts it into printable modules, so the pattern runs on across every seam. It comes from the small Brazilian studio behind the Modelador 3D Part Generator. You set the wall from 100 x 100 mm up to 4 by 3 meters, the depth at the center and the edges, a depth profile such as gradient, waves, zigzag or terraces, the cell size, a twist, the rounding of the crests and the base thickness.

There are 19 continuous pattern families and 50 visual presets, including Voronoi, gyroid, circuit and Lorenz. Enter your printer bed and it finds the largest module that fits: a 60 x 40 cm wall on a 256 mm bed becomes six pieces of 200 x 200 mm, numbered, with an assembly map. You can download a single sample piece from the middle of the panel to check the look before printing the whole wall. Pieces print flat on their back without supports, and the page warns about cropped patterns, steep walls and jobs over 60 pieces.

The panels are decorative only: there are no interlocking joints, they are not load-bearing, and they have no tested acoustic or fire rating. The page suggests PETG or ASA over PLA on sunny walls. The technical text is in Portuguese with menus partly translated, and downloads are free after registering a first name and a verified email.

What you can make

• Decorative wall panels
• Feature walls and headboards
• Geometric relief tiles

How to use Modelador 3D GeoPanel3D

1. Enter the wall size and your printer bed
2. Pick a pattern family or preset and set the depth and cell size
3. Register and download a sample piece to check the look
4. Download the numbered modules and follow the assembly map