Car Mount Phone Holder Generator

About this generator

Car Mount Phone Holder Generator makes a holder that clips a specific phone to a car mount. You pick your phone from a preset list (iPhone 13 to 17 and Air, Galaxy S20 to S26 and FE models, Galaxy A56, Pixel 10 and 11) or type custom dimensions, add the extra size of your case and a fit clearance, and choose a minimalist design with two side clamps, a full back plate or a half plate.

The settings go deep. You set wall, back plate and front lip thickness, corner and edge rounding, button and camera cut-outs and the charging opening. For charging you can build in a dock that holds a USB-C or Lightning plug from below with a locking screw, use a two-piece screw-on cable clamp, or leave a plain cut-out. The back takes an AMPS pattern, a Brodit three-hole ball joint pattern or several Brodit plate sizes, with adjustable holes. A fit test piece prints just the bottom, middle or top to check the fit first, and settings save to a JSON file.

The export is an STL, or OpenSCAD code for further editing. It is free with no account, in English or Swedish. The license allows personal, non-commercial use only: selling printed holders or the files needs written permission from the maker. The maker suggests PETG, ASA or ABS because cars get hot. It suits drivers who want a holder made for their exact phone and case.

What you can make

• Car phone holders for a specific phone
• Holders with a built-in charging dock
• Brodit and AMPS mount backs
• Fit test pieces

How to use Car Mount Phone Holder Generator

1. Choose your phone model and add your case dimensions
2. Pick a holder design and the charging option
3. Set the Brodit or AMPS mount and print a fit test piece
4. Export the full STL and print in PETG or ASA