Wave - Parametric Device Stand (1-4 Slots)

About this generator

Wave Parametric Device Stand is a free MakerWorld customizer by designer jorm that makes a vertical desk stand with one to four slots sized to your own devices. It holds a closed laptop, tablet, e-reader, phone, keyboard or Steam Deck upright, and each divider can have its own height, which gives it the curved wave look. It is a fully adjustable rework of the designer's earlier Wave laptop stand.

After clicking Customize you pick the one, two, three or four slot version. Each slot width can be set from 5 to 30 mm in half-millimeter steps, each divider height from 30 to 150 mm, and the stand thickness from about 5 to 8 mm for heavy gaming laptops. The designer suggests measuring each device with its case on and adding 1 to 2 mm of room. If the customizer does not work for you, for example on a phone, there are ready print profiles with 15, 17, 20 and 25 mm slots, plus the Fusion source files.

Since it went up in July 2026 it has been customized more than 25,000 times and liked about 3,500 times. A two-slot stand uses roughly 180 g of filament in the posted profiles. It suits anyone who wants a tidy spot on the desk for a closed laptop and a tablet that fits their exact devices.

What you can make

• Single-slot laptop stands
• Dual laptop and tablet stands
• Three and four-slot device docks
• Upright holders for a Steam Deck, e-reader or keyboard

How to use Wave - Parametric Device Stand

1. Sign in to MakerWorld, open the model and click Customize
2. Pick the 1, 2, 3 or 4 slot version
3. Enter each slot width (device thickness plus 1 to 2 mm), the divider heights and, for heavy laptops, a thicker stand
4. Generate the 3MF, or load it into the designer's Recommended Settings profile in Bambu Studio with Replace with
5. Print in PETG or PLA with 3 walls and a brim