Free

Modular Elevated Dog Bowl Stand (Parametric)

Raised pet bowl stand you size to your bowl's width and height, for one bowl or a row

Modular Elevated Dog Bowl Stand (Parametric) is a free browser tool on MakerWorld for raised food and water stands for dogs and cats. Free model; a MakerWorld account is needed to customize and download. The designer sells a commercial license through a paid MakerWorld membership (no price shown on the model page). Exports 3MF and STL. Last checked 26 September 2026.

Open Modular Elevated Dog Bowl Stand See alternatives

Opens makerworld.com

At a glance

Price: Free model; a MakerWorld account is needed to customize and download. The designer sells a commercial license through a paid MakerWorld membership (no price shown on the model page)
Runs on: MakerWorld
Exports: 3MF, STL
Multicolor: No, single color
Account: Required to download
Open source: No
Skill level: Easy: a few settings to tune
Best for: Raised food and water stands for dogs and cats
Selling prints: On a paid plan Standard Digital File License: no selling prints without permission; the designer offers a commercial license through a paid MakerWorld membership.
How we checked: Read the tool page and docs Model page: 10,881 customizations; brace takes a 130-230 mm bowl, posts a 50-90 mm bowl height and 25-90 mm riser; Customize asks you to log in
Last checked: 26 September 2026

Open generator

Sources: Modular Elevated Dog Bowl Stand on MakerWorld (checked 26 September 2026)

Something out of date? Let us know

Made Modular Elevated Dog Bowl Stand (Parametric)? Get the listing badge

About this generator

Modular Elevated Dog Bowl Stand is a free parametric model on MakerWorld, by makermatt3D, that you size to your own bowls to raise food and water off the floor. The frame is made of three printed parts: end posts, connector posts and a brace that holds the bowl. Four end posts and one brace give a single stand, and connector posts let you join two or more bowls into one feeding station. It was published in April 2026 and has been customized more than 10,000 times.

Log in and click Customize to open MakerWorld's Parametric Model Maker, which has two models to set. The brace takes your bowl diameter (130 to 230 mm). The posts take the bowl height (50 to 90 mm) and a riser height (25 to 90 mm), which is the gap between the floor and the bottom of the brace. Each one generates a 3MF that you open in Bambu Studio, where you copy the parts for your number of bowls and split the posts into separate objects. If your bowl is 185 to 195 mm wide, the ready-made print profile already fits.

The posts have snap-off supports built in, so you do not add supports in the slicer, and a PDF assembly guide is included. It suits pet owners who want a raised stand that fits the bowls they already have.

What you can make

Single-bowl raised stands
Double or multi-bowl feeding stations
Bowl braces for 130 to 230 mm bowls
Posts with a 25 to 90 mm riser height

How to use Modular Elevated Dog Bowl Stand

Measure your bowl's diameter and height
Open the model on MakerWorld, log in and click Customize
Enter the diameter for the brace, then the bowl height and riser height for the posts, and generate both
Open the two 3MF files in Bambu Studio, copy parts for your number of bowls and split the posts
Print, snap off the built-in supports and assemble with the PDF guide

What you'll need to print it

Filament and parts that suit what you make with Modular Elevated Dog Bowl Stand.

PETG

Matte PLA

6 x 2 mm magnets

Also handy

Filament dryers and dry boxes

SUNLU FilaDryer S4 (affiliate link) Amazon
Polymaker PolyDryer (affiliate link) Amazon

Print removal and cleanup tools

Bambu Lab Print Finishing Kit Bambu Lab
Bambu Lab Maker's Supply ESD Stainless Steel Tweezers Set Bambu Lab

Some of these are affiliate links: we may earn a small commission, at no extra cost to you. More about that

Modular Elevated Dog Bowl Stand pros

The fit comes from three measurements you can take with a ruler: bowl diameter, bowl height and riser height
The same three parts cover one bowl or a row of connected bowls
Snap-off supports are designed into the posts, and a ready profile covers 185 to 195 mm bowls

Modular Elevated Dog Bowl Stand cons

Brace and posts are customized separately, and you still copy parts and split the posts by hand in Bambu Studio
Sizes are capped: bowls must be 130 to 230 mm wide and the riser tops out at 90 mm, so small cat bowls and very tall stands are out
A few commenters say the built-in supports on the middle posts failed or came loose during printing