Magicfinity

What is Magicfinity?

Magicfinity is a free browser generator for two storage systems: Gridfinity and IKEA Skadis pegboards. On the Gridfinity tab you make bins from 1 x 1 up to 8 x 8 grid units and 2 to 15 height units, with equal or custom dividers, a finger scoop, a label tab, a stacking lip and holes for 6 x 2 mm magnets. There are open or magnet baseplates, and a drawer mode where you type the inside size of a drawer, even when it is not a multiple of 42 mm. Leftover space becomes a solid border or extra trays, and large baseplates are cut along grid lines to fit the bed of a Bambu Lab, Creality, Elegoo, Anycubic or Prusa printer you pick.

Upload an STL, 3MF or OBJ of a tool or part and Fit model builds a bin with a pocket shaped to it and a finger slot. The Skadis tab makes cups, bins, shelves, drawers, single and double hooks, tool racks and cable parts such as a cable channel, a cable comb and wide hooks for extension cords, all sized by their inside dimensions. You can also hang your own model with a holster, a shelf with a fitted pocket, or hooks added to its back. Clips come in tight, normal or loose, with a board thickness setting and a clip test piece.

The download is an STL, or a ZIP with one STL per part for multi-part designs such as a drawer layout. Every tool is free with no account and no download limit, and uploaded models are read on your own device. The site is marked Beta 0.3 and does not name its maker.

What you can make

• Gridfinity bins with dividers, scoops and label tabs
• Magnet baseplates and full drawer layouts
• Bins with a pocket shaped to your own tool model
• IKEA Skadis cups, shelves, hooks and cable organizers

How to use Magicfinity

1. Open the site and pick the Gridfinity or Skadis tab
2. Choose Bin, Baseplate, Drawer or Fit model and set the size
3. Add dividers, a scoop, a label tab or magnet holes
4. Click Download STL and slice the file